TRƯỜNG ĐẠI HỌC CÔNG NGHIỆP TP. HỒ CHÍ MINH
KHOA CÔNG NGHỆ CƠ KHÍ
Các công trình nghiên cứu của TS. Đào Thanh Phong
20/04/2017
gv-phongtg

Giảng viên thỉnh giảng Khoa Cơ khí – IUH

Email: daothanhphong@tdt.edu.vn

or daothanhphongck@yahoo.com

Tel: 0901.474.342

Research Interests

  • Compliant mechanism (cơ cấu mềm)
  • Biomechanic engineering (cơ sinh học)
  • Rehabilitation devices (thiết bị hỗ trợ vận động)
  • Prosthetic hand, ankle and foot (tay chân giả)
  • exoskeleton for human motion (bộ xương ngoài hỗ trợ vận động)
  • Precise micropositioning systems (hệ thống định vị micro chính xác)
  • Microgripper (tay gắp micro)
  • Vibration isolator (hệ giảm rung động)
  • Materials and smart structures (vật liệu và kết cấu thông minh)
  • Hybrid optimization algorithm (thuật toán tối ưu hóa lai tạo)

Project  research

  1. Design and analysis of a novel compact 1-DOF flexure-based mechanism, Ministry of Science and Technology, Taiwan, 2016
  1. Design and computational optimization of a decoupled two degrees of freedom based mechanism, Ministry of Science and Technology, Taiwan, 2017
  1. Design and optimization of compliant mechanisms for the system of precise gripper, Vietnam National Foundation for Science and Technology Development (NAFOSTED), 2017-2019

Publications:

A. ISI journals:

  1. Thanh-Phong Dao and Shyh-Chour Huang, “Design, fabrication, and predictive model of a 1-dof translational, flexible bearing for high precision mechanism,” Transactions of the Canadian Society for Mechanical Engineering,3:419-429, 2015. SCIE.
  1. Thanh-Phong Dao and Shyh-Chour Huang, “Robust design for a flexible bearing with 1-DOF translation using the Taguchi method and the utility concept,” Journal of Mechanical Science and Technology, 29.8: 3309-3320, 2015. SCIE.
  1. Thanh-Phong Dao, “Multiresponse optimization of a compliant guiding mechanism using hybrid Taguchi-grey based fuzzy logic approach,” Mathematical Problems in Engineering, 2016:1-17, SCIE.
  1. Thanh-Phong Dao and Shyh-Chour Huang, “Design and computational optimization of a flexure-based xy positioning platform using flexure-based response surface methodology,” International Journal of Precision Engineering and Manufacturing, 2016. SCIE.
  1. Thanh-Phong Dao and Shyh-Chour Huang, “Design and analysis of a
    compliant micro-positioning platform with embedded strain gauges and
    viscoelastic damper
    ,” Microsystem Technologies, 1-16, SCI.
  1. Thanh-Phong Dao and Shyh-Chour Huang, “Multi-objective optimal design of a 2-DOF flexure-based mechanism using hybrid approach of grey-Taguchi coupled response surface methodology and entropy measurement,” Arabian Journal for Science and Engineering, 1-17, SCIE.
  1. Thanh-Phong Dao and Shyh-Chour Huang, “Design and multi-Objective optimization for a broad self-amplified 2-DOF monolithic mechanism,” Academy Proceedings in Engineering Science, 2016. Accepted. SCIE.
  1. Thanh-Phong Dao and Shyh-Chour Huang, “Hybrid Taguchi-cuckoo search algorithm for optimization of a compliant focus positioning platform,” Applied Soft Computing, 2017, Accepted. SCIE.
  1. Thanh-Phong Dao and Shyh-Chour Huang, “Compliant thin-walled joint based on zygoptera nonlinear geometry,” Journal of Mechanical Science and Technology, 31.3: 1293-1303, 2017. SCIE.
  1. Thanh-Phong Dao and et al., “Analysis and optimization of a micro-displacement sensor for compliant microgripper,” Microsystem Technologies, 1-21, 2017. SCI.
  1. Thanh-Phong Dao and Shyh-Chour Huang, “Optimization of a two degrees of freedom compliant mechanism using Taguchi method-based grey relational analysis,” Microsystem Technologies, 1-16, 2017. SCI.
  1. Ngoc Le Chau, Van Anh Dang, Thanh-Phong Dao, “Robust parameter design and analysis of a leaf compliant joint for micropositioning systems,” Arabian Journal for Science and Engineering, 2017. Minor revision. SCIE.

B. Other journals (EI, scopus):

  1. Thanh-Phong Dao, Shyh-Chour Huang, “Optimization of flapper compliant mechanism using fuzzy logic combined Taguchi method,” Applied Mechanics and Materials, 300-301:710-713, 2013. (EI)
  1. Thanh-Phong Dao, Shyh-Chour Huang, “Optimization of multiresponse performance measure in slider-rocker compliant mechanism using fuzzy-Taguchi method,” Advanced Materials Research, 683:708-711, 2013. (EI)
  1. Thanh-Phong Dao, Shyh-Chour Huang, “Design and analysis of compliant rotary joint,” Applied Mechanics and Materials, 372:467-470, 2013. (EI)
  1. Thanh-Phong Dao, Shyh-Chour Huang, “An optimal study of a gripper compliant mechanism based on fuzzy-Taguchi method,” Applied Mechanics and Materials, 418:141-144, 2013. (EI)
  1. Thanh-Phong Dao, Shyh-Chour Huang, “A Flexible Bearing with 1-DOF Translation for High-Precision Mechanism”, Applied Mechanics and Materials, Vols.764-765, pp. 155-159, 2015. (NSC 102-2221-E-151-022) (EI).
  1. Ting-Ping Chang, Shyh-Chour Huang, Te-Fu Huang, Thanh-Phong Dao, “Analysis of Cold Preforming Process for Hollow Fasteners with Thin Flange,” Applied Mechanics and Materials, Vol. 418, pp 246-249, 2013. (EI)
  1. Hieu Giang Le, Shyh-Chour Huang, Van Son Nguyen, Thanh-Phong Dao, “Reinforcement of Polypropylene using Micro-Fillers,” Applied Mechanics and Materials, Vols. 300-301, pp. 1321-1324, 2013. (EI)
  1. Thanh-Phong Dao, Shyh-Chour Huang, “Study on Optimization of Process Parameters for Hydromechanical Deep Drawing of Trapezoid Cup”, Journal of Engineering Technology and Education, Vol.8, No.1, pp.53-71, March, 2011.
  1. Thanh-Phong Dao, Hieu Giang Le, Shyh-Chour Huang, “Investigation of Fomulation of the Energy Release Rate in the Fracture Mechanics of Short Fiber Composite”, Journal of Engineering Technology and Education, Vol. 9, No.4, pp. 451-459, Dec., 2012.
  1. Thanh-Phong Dao, Shyh-Chour Huang, “Optimization of Process Parameters and Fatigue Prediction for Flexure-Based Compliant Mechanism,” Journal of Engineering Technology and Education, Vol.10, No.2, pp. 204-220, June, 2013. (NSC 101-2221-E-151-006)
  1. Shyh-Chour Huang, Thanh-Phong Dao, “Study on Optimization for Four Bar-Partially Compliant Mechanism”, Journal of Engineering Technology and Education, Vol.10, No.4, pp.433-449, Dec., 2013. (NSC 99-2221-E-151-004-MY2)
  1. Thanh-Phong Dao, Shyh-Chour Huang, “Design and Analysis of a Clothes Holding Flexible Mechanism”, Journal of Engineering Technology and Education, Vol.11, No.1, pp.70-78, March, 2014. (NSC 99-2221-E-151-004-MY2)
  1. Thanh-Phong Dao, Shyh-Chour Huang, “Design and Analysis of Flexible Slider Crank Mechanism”, International Journal of Mechanical, Industrial Science and Engineering, Vol.8, No.5, pp. 784-791, 2014. (NSC 102-2221-E-151-022)
  1. Hieu Giang Le, Shyh-Chour Huang, Van Son Nguyen, Thanh-Phong Dao, “Investigation on the Effect of Micro-Fillers on the Strength Reinforcement of Polypropylene”, Advanced Materials Letters, Vol. 5, No.10, pp. 593-597, 2014. (Scopus, ISI)
  1. Thanh-Phong Dao, Shyh-Chour Huang, “Design and Dynamic Analysis of a Parallel Compliant Vibration Mechanism for High Precision Production Line”, International Journal of Innovation and Scientific Research, Vol. 8, No. pp. 118-123, Sept., 2014.
  1. Thanh-Phong Dao, Shyh-Chour Huang, “Development and Optimization of a Compliant Clamp for Grasping Robotics”, International Journal of Innovation and Applied Studies, Vol. 7, No.1, pp. 231-238, 1 July 2014. (NSC 100-2622-E-151-018-CC3)
  1. Ting-Ping Chang, Shyh-Chour Huang, Te-Fu Huang, Thanh-Phong Dao, “A Study of Optimal Mould Geometric Parameters During the Cold Preforming of Hollow Fasteners with a Thin Flange”, Journal of Engineering Technology and Education, Vol.11, No.3, pp.379-390, Sept., 2014.
  1. Shyh-Chour Huang, Thanh-Phong Dao, “Design and Analysis of a 2-DOF Compliant Mechanism for Nano Scale Positioning”, International Journal of Innovation and Applied Studies, Vol. 10 No.1, pp. 226-236, Jan., 2015. (NSC 100-2622-E-151-018-CC3)
  1. Ho, Nhat Linh, Thanh-Phong Dao, Shyh-Chour Huang, Hieu Giang Le, “Design and Optimization for a Compliant Gripper with Force Regulation Mechanism,” World Academy of Science, Engineering and Technology, International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering,  10.12: 1913-1919, 2017.

C. Conferences:

  1. Hieu Giang Le, Shyh-Chour Huang, Van Son Nguyen, Thanh-Phong Dao, “Reinforcement of Polypropylene using Micro-Fillers,” The 2nd International Conference on Mechatronics and Applied Mechanics (ICMAM2012), Tapei, Taiwan, ROC, December 8-9, 2012.
  1. Thanh-Phong Dao, Shyh-Chour Huang, “Optimization of Flapper Compliant Mechanism Using Fuzzy Logic Combined Taguchi Method,” The 2nd International Conference on Mechatronics and Applied Mechanics (ICMAM2012), Taipei, Taiwan, ROC, December 8-9, 2012.
  1. Thanh-Phong Dao, Shyh-Chour Huang, “Design and Analysis of Compliant Rotary Joint,” 2nd International Conference on Advance Materials Design and Mechanics (ICAMDM2013), Kuala Lumpur, Malaysia, Paper ID: 114, May 17-18, 2013. (NSC 101-2221-E-151-006).
  1. Thanh-Phong Dao, Shyh-Chour Huang, “An Optimal Study of Gripper Compliant Mechanism Based on Fuzzy-Taguchi Method,” International Conference on Applied Mechatronics and Android Robotics (ICAMAR2013), Taipei, Taiwan, ROC, July 13-14, 2013.
  1. Thanh-Phong Dao, Shyh-Chour Huang, “Optimization of Flapper Compliant Mechanism Using Fuzzy Logic Combined Taguchi Method,” International forum on advanced research in applied sciences, Kaohsiung Taiwan, ROC, March 25, 2013.
  1. Ting-Ping Chang, Shyh-Chour Huang, Te-Fu Huang and Thanh-Phong Dao, “Analysis of Cold Preforming Process for Hollow Fasteners with Thin Flange,” International Conference on Applied Mechatronic and Android Robotics (ICAMAR 2013), Taipei, Taiwan, ROC, July.13-14, 2013.
  1. Thanh-Phong Dao, Shyh-Chour Huang, “Design Optimization for a 1-DOF Translational Flexible Bearing in High Precision Mechanism,” 2nd International Conference on Green Technology and Sustainable Development (GTSD2014), Ho Chi Minh, Vietnam, pp.174–179, October 30-31, 2014. (NSC 102-2221-E-151-022).
  1. Thanh-Phong Dao, Shyh-Chour Huang, “A Flexible Bearing with 1-DOF Translation for High-Precision Mechanism,” 3rd International Conference on Engineering and Technology Innovation (ICETI2014), Kaohsiung, Taiwan, ROC, October 30-November 2, 2014.
  1. Thanh-Phong Dao, Shyh-Chour Huang, “Development and Optimization of a Compliant Clamp for Grasping,” International Forum on Advanced Research in Applied Sciences, Kaohsiung Taiwan, ROC, March 6, 2014.
  1. Thanh-Phong Dao, Shyh-Chour Huang, “Design and Analysis of Flexible Slider Crank Mechanism,” International Conference on Applied Mechanics, Materials Science and Engineering (ICAMMSE 2014), Amsterdam, Netherlands, May 15-16, 2014. (NSC 102-2221-E-151-022).
  1. Thanh-Phong Dao, Shyh-Chour Huang, “Design Optimization and Fatigue Life Predictive Model for a Flexible Mechanism,” IFToMM World Congress, Taipei, Taiwan, ROC, October 25-30, 2015. (EI).
  1. Thanh-Phong Dao, Shyh-Chour Huang, “Design and Characteristics of a Novel Compliant Planar Spring Capable of a Positive Stiffness for a Compact Vibration Isolator,” 4th Vietnam National Scientific Conference on Mechanical Engineering (VCME), Ho Chi Minh City, Vietnam, October 9-10, 2015.
  1. Thanh-Phong Dao, Shyh-Chour Huang. “A compact quasi-zero stiffness vibration isolator using flexure-based spring mechanisms capable of tunable stiffness.” ICAMMSE 2016: 18th International Conference on Applied Mechanics, Materials Science and Engineering. London, United Kingdom.
  1. Thanh-Phong Dao, Ngoc Le Chau, Hieu Giang Le, “Optimal Design of a Gravity-Balanced Compliant Exoskeleton for Motion Support of Human Arm,” The Third International Conference on Computational Science and Engineering (ICCSE-3) 28-30 November, 2016, Ho Chi Minh City, Vietnam.
  1. Tan Thang Nguyen, Hieu Giang Le, Thanh-Phong Dao, Shyh-Chour Huang, “Evaluation of structural behaviour of a novel compliant prosthetic ankle-foot,” 2017 International Conference on Mechanical, System and Control Engineering (ICMSC 2017) St. Petersburg, Russia, during May 19-21, 2017.
  1. Tan Thang Nguyen, Hieu Giang Le, Thanh-Phong Dao, Ha NghiemTrang Huynh Shyh-Chour Huang, “Biomechanical design of a novel Six DOF compliant prosthetic ankle-foot 2.0 for rehabilitation of amputee,” The ASME 2017 International Design Engineering Technical Conferences and Computers and Information in Engineering conference (IDETC/CIE 2017) ASME17 August 6-9, 2017, Cleveland, Ohio, USA.

 

 

Đơn vị liên kết