Giảng viên Khoa Cơ khí – Trường Đại học Công nghiệp Tp.HCM Email: nguyenquochung@iuh.edu.vn Tel: 0938.485.812

1. Quoc-Hung Nguyen, Young-Min Han, Seung-Bok Choi and Norman M Wereley, Geometry optimization of MR valves constrained in a specific volume using the finite element method,Smart Mater. Struct. Vol.16, no. 6, (2007) 2242–2252, SCI.

2. Quoc-Hung Nguyen, Seung-Bok Choi and Norman M Wereley,Optimal design of Magnetorheological valves via a finite element method considering control energy and a time constant, Smart Mater. Struct. Vol.17, no.2 (2008), SCI

3. Quoc Hung Nguyen and Seung-Bok Choi, Modeling of Unsteady Laminar Flow Based on Steady Solution in Jetting Dispensing Process, IEEE Transactions on Electronics Packaging Manufacturing, Vol. 31, no. 2, (2008), 134-142, SCIE

4. Seung-Bok Choi, Ji-Yong Yook, Min-Kyu Choi, Quoc Hung Nguyen, Yang-Sub Lee and Moon-Sik Han,Speed Control of DC Motor using Electrorheological Brake System, Journal of Intelligent Material Systems and Structures, Vol. 18, no.12 (2007), 1191-1196, SCIE

5. Quoc-Hung Nguyen, Min-Kyu Choi and Seung-Bok Choi, A new type of piezostack-driven jetting dispenser for semiconductor electronic packaging: modeling and control, Smart Mater. Struct. Vol.17, no. 1, (2008), SCI

6. Quoc-Hung Nguyen and Seung-Bok Choi, Optimal design of a vehicle magnetorheological damper considering the damping force and dynamic range, Smart Mater. Struct. Vol.18, no. 1, (2009), SCI

7. Quoc-Hung Nguyen and Seung-Bok Choi, Optimal design of MR shock absorber and application to vehicle suspension, Smart Mater. Struct. Vol.18, no.3, (2009), SCI

8. Quoc Hung Nguyen, Young-Min Han, Seung-Bok Choi, and Seung-Min Hong, Dynamic Characteristics of a New Jetting Dispenser Driven by Piezostack Actuator, IEEE Transactions On Electronics Packaging Manufacturing, Vol. 31, no. 3, (2008), 248-259, SCIE

9. Q. H. Nguyen, M. K. Choi, B. Y. Yun and S. B. Choi, Design of a Novel Jetting Dispenser Featuring Piezostack and Linear Pump, Journal Of Intelligent Material Systems And Structures, Vol. 19, no.3 (2008), 333-341, SCIE

10. Q H Nguyen,Y M Han, S B Choi, and S M Hong, Design of a new mechanism for jetting dispenser featuring piezoactuator, J.Mechanical Engineering Science, Vol.222 No.4, (2008), 711-722, SCI

11. Q. H. Nguyen and S. B. Choi, Performance Evaluation of a High Speed Jetting Dispenser Actuated by a Ring-Type Piezostack, J. Mechanical Engineering Science, Vol.223 No.6, (2009), 1401-1413, SCI

12. Quoc-Hung Nguyen and Seung-Bok Choi, Dynamic Modeling of ER Damper Considering Unsteady Behavior of ER Fluid Flow, Smart Mater. Struct. Vol.18, No.5, (2009), SCI

13. Quoc-Hung Nguyen, Seung-Bok Choi and Jae-Do Kim, Design and Control of a Jetting Dispenser for Semiconductor Electronic Packaging Driven by Piezostack and Flexible Beam, Smart Mater. Struct. Vol.17, No.6 (2008), SCI

14. Quoc-Hung Nguyen and Seung-Bok Choi , An analytical method for optimal design of MR valve structures, Smart Mater. Struct.Vol.18 No.9 (2009), SCI

15. Young-Min Han, Quoc-Hung Nguyen and Seung-Bok Choi, Unsteady flow modeling of an electrorheological valve system with experimental validation, Smart Mater. Struct. Vol.18 No.8 (2009), SCI

16. Quoc-Hung Nguyen and Seung-Bok Choi, A New Approach for Dynamic Modeling of Electrorheological Damper Using Lumped Parameter Method, Smart Mater. Struct.Vol.18 No 11 (2009), SCI

17. Q. H. Nguyen and S. B. Choi, A New Approach for Analytical Solution of Unsteady Laminar Flow in Dispensing Process, J. Mechanical Engineering Science Vol. 224 No.6 (2010), 1231-1243, SCI

18. Quoc-Hung Nguyen and Seung-Bok Choi, Damping Force Prediction of Electrorheological Fluid Damper Using an Analytic Dynamic Model, 2011, International Journal of Vehicle Design Vol. 56, no.1, SCIE

19. Quoc-Hung Nguyen, Seung-Bok Choi, Optimal design of an automotive magnetorheological brake considering geometric dimensions and zero-field friction heat, Smart Mater. Struct. Vol. 19, no.1, (2010), SCI.

20. Q. H. Nguyen, S. B. Choi and Y. G. Park, An Analytical Approach to Optimally Design of Electrorheological Fluid Damper for Vehicle Suspension System, Meccanica,DOI 10.1007/s11012-012-9544-3(2012), SCI

21. Quoc-Hung Nguyen, Seung-Bok Choi, Optimal design and selection of MR brake types considering breaking torque and constrained volume, Smart Mater. Struct. (2011), Vol. 21 (1), doi:10.1088/0964-1726/21/1/015012, SCI.

22. Quoc-Hung Nguyen, Seung-Bok Choi, Optimal Design of MR Brake Absorber for Torsional Vibration Control, Smart Mater. Struct. Vol. 21 (2) (2011),doi:10.1088/0964-1726/21/2/025001, SCI.

23. Quoc-Hung Nguyen, Seung-Bok Choi, Optimal design of a novel hybrid MR brake for motorcycles considering axial and radial magnetic flux, Smart Mater. Struct. Vol. (5) (2011), doi:10.1088/0964-1726/21/5/055003, SCI.

24. Quoc-Hung Nguyen, Seung-Bok Choi, Optimal Design of a T-Shaped Drum-Type Brake for Motorcycle Utilizing Magnetorheological Fluid, Mechanics Based Design of Structures and Machines: An International Journal, vol. 40 (2),153-162

25. Quoc-Hung Nguyen, Seung-Bok Choi,Optimal Design of Bobbinless Rotary Magneto-rheological based Brake, Journal of Iron and Steel Research, International, 2012, SCIE

26. Quoc Hung nguyen, Seung bok Choi, Optimal Design of a New 3-D Haptic Gripper for Telemanipulator Featuring Magnetorheological Fluid Brakes, Smart Mater. Struct. (accepted), 2012

27. Quoc hung nguyen, seung bok choi , Optimal Design of Magnetorheological Fluid Based Dampers for Front Loaded Washing Machines, submited

28. Quoc hung nguyen, seung bok choi ,Bobbinless Magnetorheological Brake: Configuration, Modeling, Optimal Design and Evaluation, submited

Journal peer reviewer:Journal of Intelligent Material Systems and Structures, smart materials and structures

International conference presentations

1. Young-Min Han, Hung Quoc Nguyen and Seung-Bok Choi, Sliding mode control of a spherical haptic device featuring electrorheological fluid , Proc. SPIE, Vol.6173, (2006), USA

2. Min-Kyu Choi, Bo-Young Yun, Quoc-Hung Nguyen, Seung-Bok Choi and Sung-Min Hong, Performance Evaluation of a New Type of Jetting Dispenser Using Piezoelectric Actuator, Proc. SPIE, Vol. 6525, (2007), USA

3. Q. H. Nguyen & B. Y. Yun & S. B. Choi, Performance Characteristics of a Piezoelectric Driven Dispenser for Semi-Conductor Package, Proceedings of SMSST’07, World Forum on Smart Materials and Smart Structures Technology, China, 2007

4. Q.H. Nguyen, M. K. Choi, B. Y. Yun, S. B. Choi, Designof a Novel Jetting Dispenser Featuring Piezostack and Linear Pump, SMIBA, KAIST, Korea, 2006

5. Quoc-Hung Nguyen, Bo-Young Yun, Seung-Min Hong, Seung-Bok Choi, Performance Characteristics of a High Frequency Jetting Dispenser Featuring Piezoelectric Actuator, Proc. SPIE, Vol. 6928, (2008), USA

6. Q. H. Nguyen, S. B. Choi and K. S. Kim , Optimal Design of MR Damper Considering Damping Force, Control Energy and Time Constant, ER/MR Conference, Sicily, Italy, 2008

7. Y. S. Jeon, Y. M. Han, Q. H. Nguyen, S. B. Choi, Unsteady Laminar Flow Analysis of ER Valve Systems: Modeling and Simulation, ER/MR Conference, Sicily, Italy, 2008

8. Quoc Hung Nguyen, Seung-Bok Choi and Chul-Hee Lee, Performance Characteristics of a Jetting Dispenser Featuring Piezostack and Flexible Beam Mechanism, Advances in Science and Technology Vol. 56 (2008), 176-181

9. S B choi, Byeong-Ho Son, Quoc-Hung Nguyen, Seung-Min Hong, Soo-Jin Lee, Design of Ultrasonic Vibrator for Conformal Coating Spray in LED Packaging, The 2nd International Conference on Multi-functional Materials and Structures 2009 Qingdao, China

10. Y.M. Han, Q.H. Nguyen, S.B. Choi and K.S. Kim, Hysteretic Behaviors of Yield Stress in Smart ER/MR Materials:Experimental Results, Key Engineering Materials Vols. 326-328 (2006) 1459-1462

11. Nguyen Quoc Hung, Min-Kyu Choi, Bo-Young Yoon and Seung-Bok Choi, Design of a New Dispensing System Featuring Piezoelectric Actuator), 2006, Korea

12. Min-Kyu Choi, Quoc Hung Nguyen, Bo-Young Yun and Seung-Bok Choi, Design and Control of Jetting Dispenser Driven by Piezoelectric Actuator), 2007, Korea

13. B Y Yun, Q H Nguyen, J W Sohn, S B Choi, performance characteristics of a high speed jetting dispenser Using Piezoactuator, Korea, 2008

14. Q H Nguyen and S B Choi, Dynamic Modeling of magnetorheological Damper Using Lumped Parameter Method, The 12th International Conference on Electrorheological (ER) Fluids and Magnetorheological (MR) Suspensions, Philadelphia, PA, USA

15. Quoc Hung Nguyen and Seung Bok Choi2011 optimal design of an hybrid magnetorheological brake for middle-sized motorcycles, Applied Mechanics and Materials Vols. 52-54 (2011) 371-377.

16. Quoc Hung Nguyen and Seung Bok Choi2011 Optimal Design of a Hybrid MR Brake for Haptic Wrist Application, Proc. SPIE, Vol. 6928, (2011), USA

17. Quoc Hung Nguyen and Seung BokChoi2011Optimal Design of a Disc-type MR Brake for Middle-sized Motorcycle, Proc. SPIE, Vol. 6928, (2011), USA

18. Nguyen Phuong Bac, Quoc Hung Nguyen and Seung BokChoi2011A new approach to modeling static hysteresis of piezostack actuator Applied Mechanics and Materials Vols. 52-54 (2011) 365-370.

19. J. S. Oh, S. B. Choi, Q. H. Nguyen, M. S. Seong and S. H. Ha, Dynamic Modeling of Magnetorheological Damper Using Lumped Parameter Method, The 12th International Conference on Electrorheological Fluids and Magnetorheological Suspensions, Philadelphia, PA, USA, 2010

20. Nguyen Quoc Hung, Nguyen Ngoc Diep, S B Choi, DESIGN OF A FLOW-MODE MAGNETO-RHEOLOGICAL SUSPENSION SYSTEM FOR WASHING MACHINES, ACOME, 2012, Hochiminh, Vietnam

21. Nguyen Si Dung, Ngo Kieu Nhi, Nguyen Quoc Hung, S B Choi, DIAGNOSIS OF BEAM-DAMAGE LOCATION USING NEURAL NETWORKS AND WAVELET ANALISYS, ACOME, 2012, Hochiminh, Vietnam